Product characteristics
High density fibers in strongly inclined orientation with polyamide bristles and variants with a total height of 1,0 / 1,5 / 2,5 mm in a black finish.
Application
Conveying of light metal parts to medium-heavy plastic parts without a dirty / oily surface.
Information
This GBS series brush material is primarily used for the following additional requirements in sorting and conveyor technology:
- Avoidance of surface damage to plastic or glass parts
- Higher performance for feeders with lightweight components
The advantage of the black version, in addition to the same material properties as the GBW, is that it is more resistant to dirt. The GBS conveyor brush could therefore be advantageous for light metal parts.
Technical data
| Typ | Height | Color | Roll Width | Unit of Quantity | Special Features |
|---|---|---|---|---|---|
| GBS1.0 | 1,0 mm | black | 450 mm | sqm | - |
| GBS1.0A-sk | 1,0 mm | black | 650 mm | sqm | self-adhesive with finish |
| GBS1.5-B | 1,5 mm | black | 450 mm | sqm | with cotton backing |
| GBS2.5-B | 2,5 mm | black | 450 mm | sqm | with cotton backing |
Download: GBS-Series Datasheet (PDF)
High-strength solvent-based contact adhesive provides a suitable bonding system for all non-rubberised surfaces, such as the GBS, GBW and FBS series of conveyor brushes.
| order number | quantity | colour | description |
|---|---|---|---|
| Contact adhesive 10 | 1000 ml | yellow | Scotch-Weld polychloroprene contact adhesive, to be used without hardener additive |
EPX processing system
Economical bonding methods using two-component structural adhesives.
Double cartridges in combination with static mixing nozzles, pneumatic and manual application devices are available. Short set-up times and homogeneous mixing for consistent, defined quality and fast, clean processing.
Scotch-Weld
These two-component structural adhesives are supplied in double cartridges with mixing ratios of 1:1 and 1:2. Simple, fast and clean processing with the EPX system, i.e. dosing, mixing and application in a single step.
Scotch-Weld DP100/DP110
Translucent. Particularly good for metal and very good for plastic bonding, for static and dynamic loads. Paste-like, low flow. Short processing time of 10-12 minutes. Further processing after approx. 30-45 minutes.
| order number | quantity | description |
|---|---|---|
| SEALING KIT | 1 pce. | consisting of application device, mixing nozzle and adhesive DP100/110 |
| Adhesive DP100 | 48,5 ml | Scotch-Weld two-component structural adhesive, rigid |
| Adhesive DP110 | 48,5 ml | Scotch-Weld two-component construction adhesive, flexible |
| Quadro mixing nozzle | 1 pce. | EPX Quadro mixing nozzle for EPX hand-held applicator for 48.5 ml cartridges |
| application device | 1 pce. | EPX hand-held applicator for EPX adhesives |
