Product characteristics
High density fibers in strongly inclined orientation with polyamide bristles and variants with a total height of 1,0 / 1,5 / 2,5 mm in a white finish.
Application
Conveying of light metal parts to medium-heavy plastic parts without a dirty / oily surface.
Information
This GBW series brush material is primarily used for the following additional requirements in sorting and conveyor technology:
- Avoidance of surface damage to plastic or glass parts
- Higher performance for feeders with lightweight components
The advantage of the white version, in addition to the same material properties as the GBS, is a optimised visibility of parts in vision applications.
Technical data
| Typ | Height | Color | Roll Width | Unit of Quantity | Special Features |
|---|---|---|---|---|---|
| GBW1.0 | 1,0 mm | white | 450 mm | sqm | - |
| GBW1.0A-sk | 1,0 mm | white | 400 mm | sqm | self-adhesive with finish |
| GBW1.5-B | 1,5 mm | white | 450 mm | sqm | with cotton backing |
| GBW2.5-B | 2,5 mm | white | 450 mm | sqm | with cotton backing |
Download: GBW-Series Datasheet (PDF)
High-strength solvent-based contact adhesive provides a suitable bonding system for all non-rubberised surfaces, such as the GBS, GBW and FBS series of conveyor brushes.
| order number | quantity | colour | description |
|---|---|---|---|
| Contact adhesive 10 | 1000 ml | yellow | Scotch-Weld polychloroprene contact adhesive, to be used without hardener additive |
EPX processing system
Economical bonding methods using two-component structural adhesives.
Double cartridges in combination with static mixing nozzles, pneumatic and manual application devices are available. Short set-up times and homogeneous mixing for consistent, defined quality and fast, clean processing.
Scotch-Weld
These two-component structural adhesives are supplied in double cartridges with mixing ratios of 1:1 and 1:2. Simple, fast and clean processing with the EPX system, i.e. dosing, mixing and application in a single step.
Scotch-Weld DP100/DP110
Translucent. Particularly good for metal and very good for plastic bonding, for static and dynamic loads. Paste-like, low flow. Short processing time of 10-12 minutes. Further processing after approx. 30-45 minutes.
| order number | quantity | description |
|---|---|---|
| SEALING KIT | 1 pce. | consisting of application device, mixing nozzle and adhesive DP100/110 |
| Adhesive DP100 | 48,5 ml | Scotch-Weld two-component structural adhesive, rigid |
| Adhesive DP110 | 48,5 ml | Scotch-Weld two-component construction adhesive, flexible |
| Quadro mixing nozzle | 1 pce. | EPX Quadro mixing nozzle for EPX hand-held applicator for 48.5 ml cartridges |
| application device | 1 pce. | EPX hand-held applicator for EPX adhesives |
